top of page


Force measurement products that have earned their reputation for quality, reliability, accuracy and ease of use. Offers a complete range of products for solving the most complex force measurement problems including force gauges, test stands, grips and fixtures and application software for data acquisition and process automation.

An ISO 17025 accredited manufacturer through A2LA and a facility that is ISO 9001:2000 compliant. Software products are also ISO TicklT accredited.

For more info, kindly visit:


DFS II Series Digital Force Gauges

The Chatillon® DFS II Series offers the best price performance of any digital force gauge available today.  DFS II Series of Digital Force Gauges is the first of their type to offer wireless data transfer and comminicaton via integral Bluetooth. 

This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS II may be equipped with integral load cells or smart remote sensors for load measurement or torque measurement. Measurement accuracy is better than 0.1% full scale in integral load cell or dedicated remote models.

A large, easy-to-read, high resolution, full color dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, set points, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be “hid­den” from the operator. The DFS II offers password protection for gauge set ups.


LTCM100 Series Motorized Test Stand (110 lbf / 500 N)

The CHATILLON® LTCM100 Series is an economical, motorized tester optimized for product floor operation. When combined with a Chatillon DF Series digital force gauge, it provides users with an easy-to-use testing system for tensile, compression, peel and flexural testing applications.


The LTCM100 Series features a large working area and 5-inch (130mm) throat ideal for large sample sizes. The base features pre-drilled holes for fitting fixtures and specialized testing jigs. Crosshead travel is controlled from a simple console or using an optional footswitch controller. Crosshead travel extends to 15 inches (380mm). Speed may be set from 0.2 to 20 in/min or 5 to 500 mm/min. A digital display indicates the travel speed during a test. The return speed may be configured to automatically return at maximum speed. Mechanical deflection limits, located on the column face can be used to set travel limit setpoints. The crosshead will stop when either the upper or lower deflection limit is contacted.


The LTCM100 Series can also use the digital output of a Chatillon DF Series digital force gauge to stop crosshead travel when a load limit is achieved.


The LTCM100 Series is supplied with a hook and compression plate and certificate of conformance. 

Get a quote/Book a service!

bottom of page